// Code generated by smithy-go-codegen DO NOT EDIT.

package sqs

import (
	"context"
	"fmt"
	awsmiddleware "github.com/aws/aws-sdk-go-v2/aws/middleware"
	"github.com/aws/aws-sdk-go-v2/service/sqs/types"
	"github.com/aws/smithy-go/middleware"
	smithyhttp "github.com/aws/smithy-go/transport/http"
)

// Retrieves one or more messages (up to 10), from the specified queue. Using the
// WaitTimeSeconds parameter enables long-poll support. For more information, see [Amazon SQS Long Polling]
// in the Amazon SQS Developer Guide.
//
// Short poll is the default behavior where a weighted random set of machines is
// sampled on a ReceiveMessage call. Therefore, only the messages on the sampled
// machines are returned. If the number of messages in the queue is small (fewer
// than 1,000), you most likely get fewer messages than you requested per
// ReceiveMessage call. If the number of messages in the queue is extremely small,
// you might not receive any messages in a particular ReceiveMessage response. If
// this happens, repeat the request.
//
// For each message returned, the response includes the following:
//
//   - The message body.
//
//   - An MD5 digest of the message body. For information about MD5, see [RFC1321].
//
//   - The MessageId you received when you sent the message to the queue.
//
//   - The receipt handle.
//
//   - The message attributes.
//
//   - An MD5 digest of the message attributes.
//
// The receipt handle is the identifier you must provide when deleting the
// message. For more information, see [Queue and Message Identifiers]in the Amazon SQS Developer Guide.
//
// You can provide the VisibilityTimeout parameter in your request. The parameter
// is applied to the messages that Amazon SQS returns in the response. If you don't
// include the parameter, the overall visibility timeout for the queue is used for
// the returned messages. The default visibility timeout for a queue is 30 seconds.
//
// In the future, new attributes might be added. If you write code that calls this
// action, we recommend that you structure your code so that it can handle new
// attributes gracefully.
//
// [Queue and Message Identifiers]: https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-queue-message-identifiers.html
// [Amazon SQS Long Polling]: https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-long-polling.html
// [RFC1321]: https://www.ietf.org/rfc/rfc1321.txt
func (c *Client) ReceiveMessage(ctx context.Context, params *ReceiveMessageInput, optFns ...func(*Options)) (*ReceiveMessageOutput, error) {
	if params == nil {
		params = &ReceiveMessageInput{}
	}

	result, metadata, err := c.invokeOperation(ctx, "ReceiveMessage", params, optFns, c.addOperationReceiveMessageMiddlewares)
	if err != nil {
		return nil, err
	}

	out := result.(*ReceiveMessageOutput)
	out.ResultMetadata = metadata
	return out, nil
}

// Retrieves one or more messages from a specified queue.
type ReceiveMessageInput struct {

	// The URL of the Amazon SQS queue from which messages are received.
	//
	// Queue URLs and names are case-sensitive.
	//
	// This member is required.
	QueueUrl *string

	// This parameter has been discontinued but will be supported for backward
	// compatibility. To provide attribute names, you are encouraged to use
	// MessageSystemAttributeNames .
	//
	// A list of attributes that need to be returned along with each message. These
	// attributes include:
	//
	//   - All – Returns all values.
	//
	//   - ApproximateFirstReceiveTimestamp – Returns the time the message was first
	//   received from the queue ([epoch time] in milliseconds).
	//
	//   - ApproximateReceiveCount – Returns the number of times a message has been
	//   received across all queues but not deleted.
	//
	//   - AWSTraceHeader – Returns the X-Ray trace header string.
	//
	//   - SenderId
	//
	//   - For a user, returns the user ID, for example ABCDEFGHI1JKLMNOPQ23R .
	//
	//   - For an IAM role, returns the IAM role ID, for example
	//   ABCDE1F2GH3I4JK5LMNOP:i-a123b456 .
	//
	//   - SentTimestamp – Returns the time the message was sent to the queue ([epoch time] in
	//   milliseconds).
	//
	//   - SqsManagedSseEnabled – Enables server-side queue encryption using SQS owned
	//   encryption keys. Only one server-side encryption option is supported per queue
	//   (for example, [SSE-KMS]or [SSE-SQS]).
	//
	//   - MessageDeduplicationId – Returns the value provided by the producer that
	//   calls the SendMessageaction.
	//
	//   - MessageGroupId – Returns the value provided by the producer that calls the SendMessage
	//   action.
	//
	//   - SequenceNumber – Returns the value provided by Amazon SQS.
	//
	// [SSE-KMS]: https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-configure-sse-existing-queue.html
	// [epoch time]: http://en.wikipedia.org/wiki/Unix_time
	// [SSE-SQS]: https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-configure-sqs-sse-queue.html
	//
	// Deprecated: AttributeNames has been replaced by MessageSystemAttributeNames
	AttributeNames []types.QueueAttributeName

	// The maximum number of messages to return. Amazon SQS never returns more
	// messages than this value (however, fewer messages might be returned). Valid
	// values: 1 to 10. Default: 1.
	MaxNumberOfMessages int32

	// The name of the message attribute, where N is the index.
	//
	//   - The name can contain alphanumeric characters and the underscore ( _ ),
	//   hyphen ( - ), and period ( . ).
	//
	//   - The name is case-sensitive and must be unique among all attribute names for
	//   the message.
	//
	//   - The name must not start with AWS-reserved prefixes such as AWS. or Amazon.
	//   (or any casing variants).
	//
	//   - The name must not start or end with a period ( . ), and it should not have
	//   periods in succession ( .. ).
	//
	//   - The name can be up to 256 characters long.
	//
	// When using ReceiveMessage , you can send a list of attribute names to receive,
	// or you can return all of the attributes by specifying All or .* in your
	// request. You can also use all message attributes starting with a prefix, for
	// example bar.* .
	MessageAttributeNames []string

	// A list of attributes that need to be returned along with each message. These
	// attributes include:
	//
	//   - All – Returns all values.
	//
	//   - ApproximateFirstReceiveTimestamp – Returns the time the message was first
	//   received from the queue ([epoch time] in milliseconds).
	//
	//   - ApproximateReceiveCount – Returns the number of times a message has been
	//   received across all queues but not deleted.
	//
	//   - AWSTraceHeader – Returns the X-Ray trace header string.
	//
	//   - SenderId
	//
	//   - For a user, returns the user ID, for example ABCDEFGHI1JKLMNOPQ23R .
	//
	//   - For an IAM role, returns the IAM role ID, for example
	//   ABCDE1F2GH3I4JK5LMNOP:i-a123b456 .
	//
	//   - SentTimestamp – Returns the time the message was sent to the queue ([epoch time] in
	//   milliseconds).
	//
	//   - SqsManagedSseEnabled – Enables server-side queue encryption using SQS owned
	//   encryption keys. Only one server-side encryption option is supported per queue
	//   (for example, [SSE-KMS]or [SSE-SQS]).
	//
	//   - MessageDeduplicationId – Returns the value provided by the producer that
	//   calls the SendMessageaction.
	//
	//   - MessageGroupId – Returns the value provided by the producer that calls the SendMessage
	//   action.
	//
	//   - SequenceNumber – Returns the value provided by Amazon SQS.
	//
	// [SSE-KMS]: https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-configure-sse-existing-queue.html
	// [epoch time]: http://en.wikipedia.org/wiki/Unix_time
	// [SSE-SQS]: https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-configure-sqs-sse-queue.html
	MessageSystemAttributeNames []types.MessageSystemAttributeName

	// This parameter applies only to FIFO (first-in-first-out) queues.
	//
	// The token used for deduplication of ReceiveMessage calls. If a networking issue
	// occurs after a ReceiveMessage action, and instead of a response you receive a
	// generic error, it is possible to retry the same action with an identical
	// ReceiveRequestAttemptId to retrieve the same set of messages, even if their
	// visibility timeout has not yet expired.
	//
	//   - You can use ReceiveRequestAttemptId only for 5 minutes after a
	//   ReceiveMessage action.
	//
	//   - When you set FifoQueue , a caller of the ReceiveMessage action can provide a
	//   ReceiveRequestAttemptId explicitly.
	//
	//   - It is possible to retry the ReceiveMessage action with the same
	//   ReceiveRequestAttemptId if none of the messages have been modified (deleted or
	//   had their visibility changes).
	//
	//   - During a visibility timeout, subsequent calls with the same
	//   ReceiveRequestAttemptId return the same messages and receipt handles. If a
	//   retry occurs within the deduplication interval, it resets the visibility
	//   timeout. For more information, see [Visibility Timeout]in the Amazon SQS Developer Guide.
	//
	// If a caller of the ReceiveMessage action still processes messages when the
	//   visibility timeout expires and messages become visible, another worker consuming
	//   from the same queue can receive the same messages and therefore process
	//   duplicates. Also, if a consumer whose message processing time is longer than the
	//   visibility timeout tries to delete the processed messages, the action fails with
	//   an error.
	//
	// To mitigate this effect, ensure that your application observes a safe threshold
	//   before the visibility timeout expires and extend the visibility timeout as
	//   necessary.
	//
	//   - While messages with a particular MessageGroupId are invisible, no more
	//   messages belonging to the same MessageGroupId are returned until the
	//   visibility timeout expires. You can still receive messages with another
	//   MessageGroupId from your FIFO queue as long as they are visible.
	//
	//   - If a caller of ReceiveMessage can't track the ReceiveRequestAttemptId , no
	//   retries work until the original visibility timeout expires. As a result, delays
	//   might occur but the messages in the queue remain in a strict order.
	//
	// The maximum length of ReceiveRequestAttemptId is 128 characters.
	// ReceiveRequestAttemptId can contain alphanumeric characters ( a-z , A-Z , 0-9 )
	// and punctuation ( !"#$%&'()*+,-./:;<=>?@[\]^_`{|}~ ).
	//
	// For best practices of using ReceiveRequestAttemptId , see [Using the ReceiveRequestAttemptId Request Parameter] in the Amazon SQS
	// Developer Guide.
	//
	// [Using the ReceiveRequestAttemptId Request Parameter]: https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/using-receiverequestattemptid-request-parameter.html
	// [Visibility Timeout]: https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-visibility-timeout.html
	ReceiveRequestAttemptId *string

	// The duration (in seconds) that the received messages are hidden from subsequent
	// retrieve requests after being retrieved by a ReceiveMessage request. If not
	// specified, the default visibility timeout for the queue is used, which is 30
	// seconds.
	//
	// Understanding VisibilityTimeout :
	//
	//   - When a message is received from a queue, it becomes temporarily invisible
	//   to other consumers for the duration of the visibility timeout. This prevents
	//   multiple consumers from processing the same message simultaneously. If the
	//   message is not deleted or its visibility timeout is not extended before the
	//   timeout expires, it becomes visible again and can be retrieved by other
	//   consumers.
	//
	//   - Setting an appropriate visibility timeout is crucial. If it's too short,
	//   the message might become visible again before processing is complete, leading to
	//   duplicate processing. If it's too long, it delays the reprocessing of messages
	//   if the initial processing fails.
	//
	//   - You can adjust the visibility timeout using the --visibility-timeout
	//   parameter in the receive-message command to match the processing time required
	//   by your application.
	//
	//   - A message that isn't deleted or a message whose visibility isn't extended
	//   before the visibility timeout expires counts as a failed receive. Depending on
	//   the configuration of the queue, the message might be sent to the dead-letter
	//   queue.
	//
	// For more information, see [Visibility Timeout] in the Amazon SQS Developer Guide.
	//
	// [Visibility Timeout]: https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-visibility-timeout.html
	VisibilityTimeout int32

	// The duration (in seconds) for which the call waits for a message to arrive in
	// the queue before returning. If a message is available, the call returns sooner
	// than WaitTimeSeconds . If no messages are available and the wait time expires,
	// the call does not return a message list. If you are using the Java SDK, it
	// returns a ReceiveMessageResponse object, which has a empty list instead of a
	// Null object.
	//
	// To avoid HTTP errors, ensure that the HTTP response timeout for ReceiveMessage
	// requests is longer than the WaitTimeSeconds parameter. For example, with the
	// Java SDK, you can set HTTP transport settings using the [NettyNioAsyncHttpClient]for asynchronous
	// clients, or the [ApacheHttpClient]for synchronous clients.
	//
	// [NettyNioAsyncHttpClient]: https://sdk.amazonaws.com/java/api/latest/software/amazon/awssdk/http/nio/netty/NettyNioAsyncHttpClient.html
	// [ApacheHttpClient]: https://sdk.amazonaws.com/java/api/latest/software/amazon/awssdk/http/apache/ApacheHttpClient.html
	WaitTimeSeconds int32

	noSmithyDocumentSerde
}

// A list of received messages.
type ReceiveMessageOutput struct {

	// A list of messages.
	Messages []types.Message

	// Metadata pertaining to the operation's result.
	ResultMetadata middleware.Metadata

	noSmithyDocumentSerde
}

func (c *Client) addOperationReceiveMessageMiddlewares(stack *middleware.Stack, options Options) (err error) {
	if err := stack.Serialize.Add(&setOperationInputMiddleware{}, middleware.After); err != nil {
		return err
	}
	err = stack.Serialize.Add(&awsAwsjson10_serializeOpReceiveMessage{}, middleware.After)
	if err != nil {
		return err
	}
	err = stack.Deserialize.Add(&awsAwsjson10_deserializeOpReceiveMessage{}, middleware.After)
	if err != nil {
		return err
	}
	if err := addProtocolFinalizerMiddlewares(stack, options, "ReceiveMessage"); err != nil {
		return fmt.Errorf("add protocol finalizers: %v", err)
	}

	if err = addlegacyEndpointContextSetter(stack, options); err != nil {
		return err
	}
	if err = addSetLoggerMiddleware(stack, options); err != nil {
		return err
	}
	if err = addClientRequestID(stack); err != nil {
		return err
	}
	if err = addComputeContentLength(stack); err != nil {
		return err
	}
	if err = addResolveEndpointMiddleware(stack, options); err != nil {
		return err
	}
	if err = addComputePayloadSHA256(stack); err != nil {
		return err
	}
	if err = addRetry(stack, options); err != nil {
		return err
	}
	if err = addRawResponseToMetadata(stack); err != nil {
		return err
	}
	if err = addRecordResponseTiming(stack); err != nil {
		return err
	}
	if err = addSpanRetryLoop(stack, options); err != nil {
		return err
	}
	if err = addClientUserAgent(stack, options); err != nil {
		return err
	}
	if err = smithyhttp.AddErrorCloseResponseBodyMiddleware(stack); err != nil {
		return err
	}
	if err = smithyhttp.AddCloseResponseBodyMiddleware(stack); err != nil {
		return err
	}
	if err = addValidateReceiveMessageChecksum(stack, options); err != nil {
		return err
	}
	if err = addSetLegacyContextSigningOptionsMiddleware(stack); err != nil {
		return err
	}
	if err = addTimeOffsetBuild(stack, c); err != nil {
		return err
	}
	if err = addUserAgentRetryMode(stack, options); err != nil {
		return err
	}
	if err = addCredentialSource(stack, options); err != nil {
		return err
	}
	if err = addOpReceiveMessageValidationMiddleware(stack); err != nil {
		return err
	}
	if err = stack.Initialize.Add(newServiceMetadataMiddleware_opReceiveMessage(options.Region), middleware.Before); err != nil {
		return err
	}
	if err = addRecursionDetection(stack); err != nil {
		return err
	}
	if err = addRequestIDRetrieverMiddleware(stack); err != nil {
		return err
	}
	if err = addResponseErrorMiddleware(stack); err != nil {
		return err
	}
	if err = addRequestResponseLogging(stack, options); err != nil {
		return err
	}
	if err = addDisableHTTPSMiddleware(stack, options); err != nil {
		return err
	}
	if err = addInterceptBeforeRetryLoop(stack, options); err != nil {
		return err
	}
	if err = addInterceptAttempt(stack, options); err != nil {
		return err
	}
	if err = addInterceptors(stack, options); err != nil {
		return err
	}
	return nil
}

func newServiceMetadataMiddleware_opReceiveMessage(region string) *awsmiddleware.RegisterServiceMetadata {
	return &awsmiddleware.RegisterServiceMetadata{
		Region:        region,
		ServiceID:     ServiceID,
		OperationName: "ReceiveMessage",
	}
}