// Code generated by smithy-go-codegen DO NOT EDIT.

package sqs

import (
	"context"
	"fmt"
	awsmiddleware "github.com/aws/aws-sdk-go-v2/aws/middleware"
	"github.com/aws/smithy-go/middleware"
	smithyhttp "github.com/aws/smithy-go/transport/http"
)

// Changes the visibility timeout of a specified message in a queue to a new
// value. The default visibility timeout for a message is 30 seconds. The minimum
// is 0 seconds. The maximum is 12 hours. For more information, see [Visibility Timeout]in the Amazon
// SQS Developer Guide.
//
// For example, if the default timeout for a queue is 60 seconds, 15 seconds have
// elapsed since you received the message, and you send a ChangeMessageVisibility
// call with VisibilityTimeout set to 10 seconds, the 10 seconds begin to count
// from the time that you make the ChangeMessageVisibility call. Thus, any attempt
// to change the visibility timeout or to delete that message 10 seconds after you
// initially change the visibility timeout (a total of 25 seconds) might result in
// an error.
//
// An Amazon SQS message has three basic states:
//
//   - Sent to a queue by a producer.
//
//   - Received from the queue by a consumer.
//
//   - Deleted from the queue.
//
// A message is considered to be stored after it is sent to a queue by a producer,
// but not yet received from the queue by a consumer (that is, between states 1 and
// 2). There is no limit to the number of stored messages. A message is considered
// to be in flight after it is received from a queue by a consumer, but not yet
// deleted from the queue (that is, between states 2 and 3). There is a limit to
// the number of in flight messages.
//
// Limits that apply to in flight messages are unrelated to the unlimited number
// of stored messages.
//
// For most standard queues (depending on queue traffic and message backlog),
// there can be a maximum of approximately 120,000 in flight messages (received
// from a queue by a consumer, but not yet deleted from the queue). If you reach
// this limit, Amazon SQS returns the OverLimit error message. To avoid reaching
// the limit, you should delete messages from the queue after they're processed.
// You can also increase the number of queues you use to process your messages. To
// request a limit increase, [file a support request].
//
// For FIFO queues, there can be a maximum of 120,000 in flight messages (received
// from a queue by a consumer, but not yet deleted from the queue). If you reach
// this limit, Amazon SQS returns no error messages.
//
// If you attempt to set the VisibilityTimeout to a value greater than the maximum
// time left, Amazon SQS returns an error. Amazon SQS doesn't automatically
// recalculate and increase the timeout to the maximum remaining time.
//
// Unlike with a queue, when you change the visibility timeout for a specific
// message the timeout value is applied immediately but isn't saved in memory for
// that message. If you don't delete a message after it is received, the visibility
// timeout for the message reverts to the original timeout value (not to the value
// you set using the ChangeMessageVisibility action) the next time the message is
// received.
//
// [Visibility Timeout]: https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-visibility-timeout.html
// [file a support request]: https://console.aws.amazon.com/support/home#/case/create?issueType=service-limit-increase&limitType=service-code-sqs
func (c *Client) ChangeMessageVisibility(ctx context.Context, params *ChangeMessageVisibilityInput, optFns ...func(*Options)) (*ChangeMessageVisibilityOutput, error) {
	if params == nil {
		params = &ChangeMessageVisibilityInput{}
	}

	result, metadata, err := c.invokeOperation(ctx, "ChangeMessageVisibility", params, optFns, c.addOperationChangeMessageVisibilityMiddlewares)
	if err != nil {
		return nil, err
	}

	out := result.(*ChangeMessageVisibilityOutput)
	out.ResultMetadata = metadata
	return out, nil
}

type ChangeMessageVisibilityInput struct {

	// The URL of the Amazon SQS queue whose message's visibility is changed.
	//
	// Queue URLs and names are case-sensitive.
	//
	// This member is required.
	QueueUrl *string

	// The receipt handle associated with the message, whose visibility timeout is
	// changed. This parameter is returned by the ReceiveMessageaction.
	//
	// This member is required.
	ReceiptHandle *string

	// The new value for the message's visibility timeout (in seconds). Values range: 0
	// to 43200 . Maximum: 12 hours.
	//
	// This member is required.
	VisibilityTimeout int32

	noSmithyDocumentSerde
}

type ChangeMessageVisibilityOutput struct {
	// Metadata pertaining to the operation's result.
	ResultMetadata middleware.Metadata

	noSmithyDocumentSerde
}

func (c *Client) addOperationChangeMessageVisibilityMiddlewares(stack *middleware.Stack, options Options) (err error) {
	if err := stack.Serialize.Add(&setOperationInputMiddleware{}, middleware.After); err != nil {
		return err
	}
	err = stack.Serialize.Add(&awsAwsjson10_serializeOpChangeMessageVisibility{}, middleware.After)
	if err != nil {
		return err
	}
	err = stack.Deserialize.Add(&awsAwsjson10_deserializeOpChangeMessageVisibility{}, middleware.After)
	if err != nil {
		return err
	}
	if err := addProtocolFinalizerMiddlewares(stack, options, "ChangeMessageVisibility"); err != nil {
		return fmt.Errorf("add protocol finalizers: %v", err)
	}

	if err = addlegacyEndpointContextSetter(stack, options); err != nil {
		return err
	}
	if err = addSetLoggerMiddleware(stack, options); err != nil {
		return err
	}
	if err = addClientRequestID(stack); err != nil {
		return err
	}
	if err = addComputeContentLength(stack); err != nil {
		return err
	}
	if err = addResolveEndpointMiddleware(stack, options); err != nil {
		return err
	}
	if err = addComputePayloadSHA256(stack); err != nil {
		return err
	}
	if err = addRetry(stack, options); err != nil {
		return err
	}
	if err = addRawResponseToMetadata(stack); err != nil {
		return err
	}
	if err = addRecordResponseTiming(stack); err != nil {
		return err
	}
	if err = addSpanRetryLoop(stack, options); err != nil {
		return err
	}
	if err = addClientUserAgent(stack, options); err != nil {
		return err
	}
	if err = smithyhttp.AddErrorCloseResponseBodyMiddleware(stack); err != nil {
		return err
	}
	if err = smithyhttp.AddCloseResponseBodyMiddleware(stack); err != nil {
		return err
	}
	if err = addSetLegacyContextSigningOptionsMiddleware(stack); err != nil {
		return err
	}
	if err = addTimeOffsetBuild(stack, c); err != nil {
		return err
	}
	if err = addUserAgentRetryMode(stack, options); err != nil {
		return err
	}
	if err = addCredentialSource(stack, options); err != nil {
		return err
	}
	if err = addOpChangeMessageVisibilityValidationMiddleware(stack); err != nil {
		return err
	}
	if err = stack.Initialize.Add(newServiceMetadataMiddleware_opChangeMessageVisibility(options.Region), middleware.Before); err != nil {
		return err
	}
	if err = addRecursionDetection(stack); err != nil {
		return err
	}
	if err = addRequestIDRetrieverMiddleware(stack); err != nil {
		return err
	}
	if err = addResponseErrorMiddleware(stack); err != nil {
		return err
	}
	if err = addRequestResponseLogging(stack, options); err != nil {
		return err
	}
	if err = addDisableHTTPSMiddleware(stack, options); err != nil {
		return err
	}
	if err = addInterceptBeforeRetryLoop(stack, options); err != nil {
		return err
	}
	if err = addInterceptAttempt(stack, options); err != nil {
		return err
	}
	if err = addInterceptors(stack, options); err != nil {
		return err
	}
	return nil
}

func newServiceMetadataMiddleware_opChangeMessageVisibility(region string) *awsmiddleware.RegisterServiceMetadata {
	return &awsmiddleware.RegisterServiceMetadata{
		Region:        region,
		ServiceID:     ServiceID,
		OperationName: "ChangeMessageVisibility",
	}
}