// Code generated by smithy-go-codegen DO NOT EDIT.

package ec2

import (
	"context"
	"fmt"
	awsmiddleware "github.com/aws/aws-sdk-go-v2/aws/middleware"
	"github.com/aws/aws-sdk-go-v2/service/ec2/types"
	"github.com/aws/smithy-go/middleware"
	smithyhttp "github.com/aws/smithy-go/transport/http"
)

// Launches the specified number of instances using an AMI for which you have
// permissions.
//
// You can specify a number of options, or leave the default options. The
// following rules apply:
//
//   - If you don't specify a subnet ID, we choose a default subnet from your
//     default VPC for you. If you don't have a default VPC, you must specify a subnet
//     ID in the request.
//
//   - All instances have a network interface with a primary private IPv4 address.
//     If you don't specify this address, we choose one from the IPv4 range of your
//     subnet.
//
//   - Not all instance types support IPv6 addresses. For more information, see [Instance types].
//
//   - If you don't specify a security group ID, we use the default security group
//     for the VPC. For more information, see [Security groups].
//
//   - If any of the AMIs have a product code attached for which the user has not
//     subscribed, the request fails.
//
// You can create a [launch template], which is a resource that contains the parameters to launch
// an instance. When you launch an instance using RunInstances, you can specify the launch
// template instead of specifying the launch parameters.
//
// To ensure faster instance launches, break up large requests into smaller
// batches. For example, create five separate launch requests for 100 instances
// each instead of one launch request for 500 instances.
//
// RunInstances is subject to both request rate limiting and resource rate
// limiting. For more information, see [Request throttling].
//
// An instance is ready for you to use when it's in the running state. You can
// check the state of your instance using DescribeInstances. You can tag instances and EBS volumes
// during launch, after launch, or both. For more information, see CreateTagsand [Tagging your Amazon EC2 resources].
//
// Linux instances have access to the public key of the key pair at boot. You can
// use this key to provide secure access to the instance. Amazon EC2 public images
// use this feature to provide secure access without passwords. For more
// information, see [Key pairs].
//
// For troubleshooting, see [What to do if an instance immediately terminates], and [Troubleshooting connecting to your instance].
//
// [Key pairs]: https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ec2-key-pairs.html
// [What to do if an instance immediately terminates]: https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/Using_InstanceStraightToTerminated.html
// [Tagging your Amazon EC2 resources]: https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/Using_Tags.html
// [launch template]: https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ec2-launch-templates.html
// [Security groups]: https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/using-network-security.html
// [Request throttling]: https://docs.aws.amazon.com/ec2/latest/devguide/ec2-api-throttling.html
// [Instance types]: https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/instance-types.html
// [Troubleshooting connecting to your instance]: https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/TroubleshootingInstancesConnecting.html
func (c *Client) RunInstances(ctx context.Context, params *RunInstancesInput, optFns ...func(*Options)) (*RunInstancesOutput, error) {
	if params == nil {
		params = &RunInstancesInput{}
	}

	result, metadata, err := c.invokeOperation(ctx, "RunInstances", params, optFns, c.addOperationRunInstancesMiddlewares)
	if err != nil {
		return nil, err
	}

	out := result.(*RunInstancesOutput)
	out.ResultMetadata = metadata
	return out, nil
}

type RunInstancesInput struct {

	// The maximum number of instances to launch. If you specify a value that is more
	// capacity than Amazon EC2 can launch in the target Availability Zone, Amazon EC2
	// launches the largest possible number of instances above the specified minimum
	// count.
	//
	// Constraints: Between 1 and the quota for the specified instance type for your
	// account for this Region. For more information, see [Amazon EC2 instance type quotas].
	//
	// [Amazon EC2 instance type quotas]: https://docs.aws.amazon.com/ec2/latest/instancetypes/ec2-instance-quotas.html
	//
	// This member is required.
	MaxCount *int32

	// The minimum number of instances to launch. If you specify a value that is more
	// capacity than Amazon EC2 can provide in the target Availability Zone, Amazon EC2
	// does not launch any instances.
	//
	// Constraints: Between 1 and the quota for the specified instance type for your
	// account for this Region. For more information, see [Amazon EC2 instance type quotas].
	//
	// [Amazon EC2 instance type quotas]: https://docs.aws.amazon.com/ec2/latest/instancetypes/ec2-instance-quotas.html
	//
	// This member is required.
	MinCount *int32

	// Reserved.
	AdditionalInfo *string

	// The block device mapping, which defines the EBS volumes and instance store
	// volumes to attach to the instance at launch. For more information, see [Block device mappings]in the
	// Amazon EC2 User Guide.
	//
	// [Block device mappings]: https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/block-device-mapping-concepts.html
	BlockDeviceMappings []types.BlockDeviceMapping

	// Information about the Capacity Reservation targeting option. If you do not
	// specify this parameter, the instance's Capacity Reservation preference defaults
	// to open , which enables it to run in any open Capacity Reservation that has
	// matching attributes (instance type, platform, Availability Zone, and tenancy).
	CapacityReservationSpecification *types.CapacityReservationSpecification

	// Unique, case-sensitive identifier you provide to ensure the idempotency of the
	// request. If you do not specify a client token, a randomly generated token is
	// used for the request to ensure idempotency.
	//
	// For more information, see [Ensuring idempotency in Amazon EC2 API requests].
	//
	// Constraints: Maximum 64 ASCII characters
	//
	// [Ensuring idempotency in Amazon EC2 API requests]: https://docs.aws.amazon.com/ec2/latest/devguide/ec2-api-idempotency.html
	ClientToken *string

	// The CPU options for the instance. For more information, see [Optimize CPU options] in the Amazon EC2
	// User Guide.
	//
	// [Optimize CPU options]: https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/instance-optimize-cpu.html
	CpuOptions *types.CpuOptionsRequest

	// The credit option for CPU usage of the burstable performance instance. Valid
	// values are standard and unlimited . To change this attribute after launch, use [ModifyInstanceCreditSpecification]
	// . For more information, see [Burstable performance instances]in the Amazon EC2 User Guide.
	//
	// Default: standard (T2 instances) or unlimited (T3/T3a/T4g instances)
	//
	// For T3 instances with host tenancy, only standard is supported.
	//
	// [ModifyInstanceCreditSpecification]: https://docs.aws.amazon.com/AWSEC2/latest/APIReference/API_ModifyInstanceCreditSpecification.html
	// [Burstable performance instances]: https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/burstable-performance-instances.html
	CreditSpecification *types.CreditSpecificationRequest

	// Indicates whether an instance is enabled for stop protection. For more
	// information, see [Enable stop protection for your EC2 instances].
	//
	// [Enable stop protection for your EC2 instances]: https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ec2-stop-protection.html
	DisableApiStop *bool

	// Indicates whether termination protection is enabled for the instance. The
	// default is false , which means that you can terminate the instance using the
	// Amazon EC2 console, command line tools, or API. You can enable termination
	// protection when you launch an instance, while the instance is running, or while
	// the instance is stopped.
	DisableApiTermination *bool

	// Checks whether you have the required permissions for the operation, without
	// actually making the request, and provides an error response. If you have the
	// required permissions, the error response is DryRunOperation . Otherwise, it is
	// UnauthorizedOperation .
	DryRun *bool

	// Indicates whether the instance is optimized for Amazon EBS I/O. This
	// optimization provides dedicated throughput to Amazon EBS and an optimized
	// configuration stack to provide optimal Amazon EBS I/O performance. This
	// optimization isn't available with all instance types. Additional usage charges
	// apply when using an EBS-optimized instance.
	//
	// Default: false
	EbsOptimized *bool

	// An elastic GPU to associate with the instance.
	//
	// Amazon Elastic Graphics reached end of life on January 8, 2024.
	//
	// Deprecated: Specifying Elastic Graphics accelerators is no longer supported on
	// the RunInstances API.
	ElasticGpuSpecification []types.ElasticGpuSpecification

	// An elastic inference accelerator to associate with the instance.
	//
	// Amazon Elastic Inference is no longer available.
	//
	// Deprecated: Specifying Elastic Inference accelerators is no longer supported on
	// the RunInstances API.
	ElasticInferenceAccelerators []types.ElasticInferenceAccelerator

	// If you’re launching an instance into a dual-stack or IPv6-only subnet, you can
	// enable assigning a primary IPv6 address. A primary IPv6 address is an IPv6 GUA
	// address associated with an ENI that you have enabled to use a primary IPv6
	// address. Use this option if an instance relies on its IPv6 address not changing.
	// When you launch the instance, Amazon Web Services will automatically assign an
	// IPv6 address associated with the ENI attached to your instance to be the primary
	// IPv6 address. Once you enable an IPv6 GUA address to be a primary IPv6, you
	// cannot disable it. When you enable an IPv6 GUA address to be a primary IPv6, the
	// first IPv6 GUA will be made the primary IPv6 address until the instance is
	// terminated or the network interface is detached. If you have multiple IPv6
	// addresses associated with an ENI attached to your instance and you enable a
	// primary IPv6 address, the first IPv6 GUA address associated with the ENI becomes
	// the primary IPv6 address.
	EnablePrimaryIpv6 *bool

	// Indicates whether the instance is enabled for Amazon Web Services Nitro
	// Enclaves. For more information, see [Amazon Web Services Nitro Enclaves User Guide].
	//
	// You can't enable Amazon Web Services Nitro Enclaves and hibernation on the same
	// instance.
	//
	// [Amazon Web Services Nitro Enclaves User Guide]: https://docs.aws.amazon.com/enclaves/latest/user/
	EnclaveOptions *types.EnclaveOptionsRequest

	// Indicates whether an instance is enabled for hibernation. This parameter is
	// valid only if the instance meets the [hibernation prerequisites]. For more information, see [Hibernate your Amazon EC2 instance] in the Amazon
	// EC2 User Guide.
	//
	// You can't enable hibernation and Amazon Web Services Nitro Enclaves on the same
	// instance.
	//
	// [Hibernate your Amazon EC2 instance]: https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/Hibernate.html
	// [hibernation prerequisites]: https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/hibernating-prerequisites.html
	HibernationOptions *types.HibernationOptionsRequest

	// The name or Amazon Resource Name (ARN) of an IAM instance profile.
	IamInstanceProfile *types.IamInstanceProfileSpecification

	// The ID of the AMI. An AMI ID is required to launch an instance and must be
	// specified here or in a launch template.
	ImageId *string

	// Indicates whether an instance stops or terminates when you initiate shutdown
	// from the instance (using the operating system command for system shutdown).
	//
	// Default: stop
	InstanceInitiatedShutdownBehavior types.ShutdownBehavior

	// The market (purchasing) option for the instances.
	//
	// For RunInstances, persistent Spot Instance requests are only supported when
	// InstanceInterruptionBehavior is set to either hibernate or stop .
	InstanceMarketOptions *types.InstanceMarketOptionsRequest

	// The instance type. For more information, see [Amazon EC2 Instance Types Guide].
	//
	// [Amazon EC2 Instance Types Guide]: https://docs.aws.amazon.com/ec2/latest/instancetypes/instance-types.html
	InstanceType types.InstanceType

	// The number of IPv6 addresses to associate with the primary network interface.
	// Amazon EC2 chooses the IPv6 addresses from the range of your subnet. You cannot
	// specify this option and the option to assign specific IPv6 addresses in the same
	// request. You can specify this option if you've specified a minimum number of
	// instances to launch.
	//
	// You cannot specify this option and the network interfaces option in the same
	// request.
	Ipv6AddressCount *int32

	// The IPv6 addresses from the range of the subnet to associate with the primary
	// network interface. You cannot specify this option and the option to assign a
	// number of IPv6 addresses in the same request. You cannot specify this option if
	// you've specified a minimum number of instances to launch.
	//
	// You cannot specify this option and the network interfaces option in the same
	// request.
	Ipv6Addresses []types.InstanceIpv6Address

	// The ID of the kernel.
	//
	// We recommend that you use PV-GRUB instead of kernels and RAM disks. For more
	// information, see [PV-GRUB]in the Amazon EC2 User Guide.
	//
	// [PV-GRUB]: https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/UserProvidedkernels.html
	KernelId *string

	// The name of the key pair. For more information, see [Create a key pair for your EC2 instance].
	//
	// If you do not specify a key pair, you can't connect to the instance unless you
	// choose an AMI that is configured to allow users another way to log in.
	//
	// [Create a key pair for your EC2 instance]: https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/create-key-pairs.html
	KeyName *string

	// The launch template. Any additional parameters that you specify for the new
	// instance overwrite the corresponding parameters included in the launch template.
	LaunchTemplate *types.LaunchTemplateSpecification

	// The license configurations.
	LicenseSpecifications []types.LicenseConfigurationRequest

	// The maintenance and recovery options for the instance.
	MaintenanceOptions *types.InstanceMaintenanceOptionsRequest

	// The metadata options for the instance. For more information, see [Configure the Instance Metadata Service options].
	//
	// [Configure the Instance Metadata Service options]: https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/configuring-instance-metadata-options.html
	MetadataOptions *types.InstanceMetadataOptionsRequest

	// Specifies whether detailed monitoring is enabled for the instance.
	Monitoring *types.RunInstancesMonitoringEnabled

	// The network interfaces to associate with the instance.
	NetworkInterfaces []types.InstanceNetworkInterfaceSpecification

	// Contains settings for the network performance options for the instance.
	NetworkPerformanceOptions *types.InstanceNetworkPerformanceOptionsRequest

	// Reserved for internal use.
	Operator *types.OperatorRequest

	// The placement for the instance.
	Placement *types.Placement

	// The options for the instance hostname. The default values are inherited from
	// the subnet. Applies only if creating a network interface, not attaching an
	// existing one.
	PrivateDnsNameOptions *types.PrivateDnsNameOptionsRequest

	// The primary IPv4 address. You must specify a value from the IPv4 address range
	// of the subnet.
	//
	// Only one private IP address can be designated as primary. You can't specify
	// this option if you've specified the option to designate a private IP address as
	// the primary IP address in a network interface specification. You cannot specify
	// this option if you're launching more than one instance in the request.
	//
	// You cannot specify this option and the network interfaces option in the same
	// request.
	PrivateIpAddress *string

	// The ID of the RAM disk to select. Some kernels require additional drivers at
	// launch. Check the kernel requirements for information about whether you need to
	// specify a RAM disk. To find kernel requirements, go to the Amazon Web Services
	// Resource Center and search for the kernel ID.
	//
	// We recommend that you use PV-GRUB instead of kernels and RAM disks. For more
	// information, see [PV-GRUB]in the Amazon EC2 User Guide.
	//
	// [PV-GRUB]: https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/UserProvidedkernels.html
	RamdiskId *string

	// The secondary interfaces to associate with the instance.
	SecondaryInterfaces []types.InstanceSecondaryInterfaceSpecificationRequest

	// The IDs of the security groups.
	//
	// If you specify a network interface, you must specify any security groups as
	// part of the network interface instead of using this parameter.
	SecurityGroupIds []string

	// [Default VPC] The names of the security groups.
	//
	// If you specify a network interface, you must specify any security groups as
	// part of the network interface instead of using this parameter.
	//
	// Default: Amazon EC2 uses the default security group.
	SecurityGroups []string

	// The ID of the subnet to launch the instance into.
	//
	// If you specify a network interface, you must specify any subnets as part of the
	// network interface instead of using this parameter.
	SubnetId *string

	// The tags to apply to the resources that are created during instance launch.
	//
	// You can specify tags for the following resources only:
	//
	//   - Instances
	//
	//   - Volumes
	//
	//   - Spot Instance requests
	//
	//   - Network interfaces
	//
	// To tag a resource after it has been created, see [CreateTags].
	//
	// [CreateTags]: https://docs.aws.amazon.com/AWSEC2/latest/APIReference/API_CreateTags.html
	TagSpecifications []types.TagSpecification

	// The user data to make available to the instance. User data must be
	// base64-encoded. Depending on the tool or SDK that you're using, the
	// base64-encoding might be performed for you. For more information, see [Run commands at launch using instance user data].
	//
	// [Run commands at launch using instance user data]: https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/user-data.html
	UserData *string

	noSmithyDocumentSerde
}

// Describes a launch request for one or more instances, and includes owner,
// requester, and security group information that applies to all instances in the
// launch request.
type RunInstancesOutput struct {

	// Not supported.
	Groups []types.GroupIdentifier

	// The instances.
	Instances []types.Instance

	// The ID of the Amazon Web Services account that owns the reservation.
	OwnerId *string

	// The ID of the requester that launched the instances on your behalf (for
	// example, Amazon Web Services Management Console or Auto Scaling).
	RequesterId *string

	// The ID of the reservation.
	ReservationId *string

	// Metadata pertaining to the operation's result.
	ResultMetadata middleware.Metadata

	noSmithyDocumentSerde
}

func (c *Client) addOperationRunInstancesMiddlewares(stack *middleware.Stack, options Options) (err error) {
	if err := stack.Serialize.Add(&setOperationInputMiddleware{}, middleware.After); err != nil {
		return err
	}
	err = stack.Serialize.Add(&awsEc2query_serializeOpRunInstances{}, middleware.After)
	if err != nil {
		return err
	}
	err = stack.Deserialize.Add(&awsEc2query_deserializeOpRunInstances{}, middleware.After)
	if err != nil {
		return err
	}
	if err := addProtocolFinalizerMiddlewares(stack, options, "RunInstances"); err != nil {
		return fmt.Errorf("add protocol finalizers: %v", err)
	}

	if err = addlegacyEndpointContextSetter(stack, options); err != nil {
		return err
	}
	if err = addSetLoggerMiddleware(stack, options); err != nil {
		return err
	}
	if err = addClientRequestID(stack); err != nil {
		return err
	}
	if err = addComputeContentLength(stack); err != nil {
		return err
	}
	if err = addResolveEndpointMiddleware(stack, options); err != nil {
		return err
	}
	if err = addComputePayloadSHA256(stack); err != nil {
		return err
	}
	if err = addRetry(stack, options, c); err != nil {
		return err
	}
	if err = addRawResponseToMetadata(stack); err != nil {
		return err
	}
	if err = addRecordResponseTiming(stack); err != nil {
		return err
	}
	if err = addSpanRetryLoop(stack, options); err != nil {
		return err
	}
	if err = addClientUserAgent(stack, options); err != nil {
		return err
	}
	if err = smithyhttp.AddErrorCloseResponseBodyMiddleware(stack); err != nil {
		return err
	}
	if err = smithyhttp.AddCloseResponseBodyMiddleware(stack); err != nil {
		return err
	}
	if err = addSetLegacyContextSigningOptionsMiddleware(stack); err != nil {
		return err
	}
	if err = addUserAgentRetryMode(stack, options); err != nil {
		return err
	}
	if err = addCredentialSource(stack, options); err != nil {
		return err
	}
	if err = addIdempotencyToken_opRunInstancesMiddleware(stack, options); err != nil {
		return err
	}
	if err = addOpRunInstancesValidationMiddleware(stack); err != nil {
		return err
	}
	if err = stack.Initialize.Add(newServiceMetadataMiddleware_opRunInstances(options.Region), middleware.Before); err != nil {
		return err
	}
	if err = addRecursionDetection(stack); err != nil {
		return err
	}
	if err = addRequestIDRetrieverMiddleware(stack); err != nil {
		return err
	}
	if err = addResponseErrorMiddleware(stack); err != nil {
		return err
	}
	if err = addRequestResponseLogging(stack, options); err != nil {
		return err
	}
	if err = addDisableHTTPSMiddleware(stack, options); err != nil {
		return err
	}
	if err = addInterceptBeforeRetryLoop(stack, options); err != nil {
		return err
	}
	if err = addInterceptAttempt(stack, options); err != nil {
		return err
	}
	if err = addInterceptors(stack, options); err != nil {
		return err
	}
	return nil
}

type idempotencyToken_initializeOpRunInstances struct {
	tokenProvider IdempotencyTokenProvider
}

func (*idempotencyToken_initializeOpRunInstances) ID() string {
	return "OperationIdempotencyTokenAutoFill"
}

func (m *idempotencyToken_initializeOpRunInstances) HandleInitialize(ctx context.Context, in middleware.InitializeInput, next middleware.InitializeHandler) (
	out middleware.InitializeOutput, metadata middleware.Metadata, err error,
) {
	if m.tokenProvider == nil {
		return next.HandleInitialize(ctx, in)
	}

	input, ok := in.Parameters.(*RunInstancesInput)
	if !ok {
		return out, metadata, fmt.Errorf("expected middleware input to be of type *RunInstancesInput ")
	}

	if input.ClientToken == nil {
		t, err := m.tokenProvider.GetIdempotencyToken()
		if err != nil {
			return out, metadata, err
		}
		input.ClientToken = &t
	}
	return next.HandleInitialize(ctx, in)
}
func addIdempotencyToken_opRunInstancesMiddleware(stack *middleware.Stack, cfg Options) error {
	return stack.Initialize.Add(&idempotencyToken_initializeOpRunInstances{tokenProvider: cfg.IdempotencyTokenProvider}, middleware.Before)
}

func newServiceMetadataMiddleware_opRunInstances(region string) *awsmiddleware.RegisterServiceMetadata {
	return &awsmiddleware.RegisterServiceMetadata{
		Region:        region,
		ServiceID:     ServiceID,
		OperationName: "RunInstances",
	}
}