// Code generated by smithy-go-codegen DO NOT EDIT.

package ec2

import (
	"context"
	"fmt"
	awsmiddleware "github.com/aws/aws-sdk-go-v2/aws/middleware"
	"github.com/aws/aws-sdk-go-v2/service/ec2/types"
	"github.com/aws/smithy-go/middleware"
	smithyhttp "github.com/aws/smithy-go/transport/http"
)

// You can modify several parameters of an existing EBS volume, including volume
// size, volume type, and IOPS capacity. If your EBS volume is attached to a
// current-generation EC2 instance type, you might be able to apply these changes
// without stopping the instance or detaching the volume from it. For more
// information about modifying EBS volumes, see [Amazon EBS Elastic Volumes]in the Amazon EBS User Guide.
//
// When you complete a resize operation on your volume, you need to extend the
// volume's file-system size to take advantage of the new storage capacity. For
// more information, see [Extend the file system].
//
// For more information, see [Monitor the progress of volume modifications] in the Amazon EBS User Guide.
//
// With previous-generation instance types, resizing an EBS volume might require
// detaching and reattaching the volume or stopping and restarting the instance.
//
// After you initiate a volume modification, you must wait for that modification
// to reach the completed state before you can initiate another modification for
// the same volume. You can modify a volume up to four times within a rolling
// 24-hour period, as long as the volume is in the in-use or available state, and
// all previous modifications for that volume are completed . If you exceed this
// limit, you get an error message that indicates when you can perform your next
// modification.
//
// [Monitor the progress of volume modifications]: https://docs.aws.amazon.com/ebs/latest/userguide/monitoring-volume-modifications.html
// [Amazon EBS Elastic Volumes]: https://docs.aws.amazon.com/ebs/latest/userguide/ebs-modify-volume.html
// [Extend the file system]: https://docs.aws.amazon.com/ebs/latest/userguide/recognize-expanded-volume-linux.html
func (c *Client) ModifyVolume(ctx context.Context, params *ModifyVolumeInput, optFns ...func(*Options)) (*ModifyVolumeOutput, error) {
	if params == nil {
		params = &ModifyVolumeInput{}
	}

	result, metadata, err := c.invokeOperation(ctx, "ModifyVolume", params, optFns, c.addOperationModifyVolumeMiddlewares)
	if err != nil {
		return nil, err
	}

	out := result.(*ModifyVolumeOutput)
	out.ResultMetadata = metadata
	return out, nil
}

type ModifyVolumeInput struct {

	// The ID of the volume.
	//
	// This member is required.
	VolumeId *string

	// Checks whether you have the required permissions for the action, without
	// actually making the request, and provides an error response. If you have the
	// required permissions, the error response is DryRunOperation . Otherwise, it is
	// UnauthorizedOperation .
	DryRun *bool

	// The target IOPS rate of the volume. This parameter is valid only for gp3 , io1 ,
	// and io2 volumes.
	//
	// The following are the supported values for each volume type:
	//
	//   - gp3 : 3,000 - 80,000 IOPS
	//
	//   - io1 : 100 - 64,000 IOPS
	//
	//   - io2 : 100 - 256,000 IOPS
	//
	// [Instances built on the Nitro System]can support up to 256,000 IOPS. Other instances can support up to 32,000 IOPS.
	//
	// Default: The existing value is retained if you keep the same volume type. If
	// you change the volume type to io1 , io2 , or gp3 , the default is 3,000.
	//
	// [Instances built on the Nitro System]: https://docs.aws.amazon.com/ec2/latest/instancetypes/ec2-nitro-instances.html
	Iops *int32

	// Specifies whether to enable Amazon EBS Multi-Attach. If you enable
	// Multi-Attach, you can attach the volume to up to 16 [Nitro-based instances]in the same Availability
	// Zone. This parameter is supported with io1 and io2 volumes only. For more
	// information, see [Amazon EBS Multi-Attach]in the Amazon EBS User Guide.
	//
	// [Amazon EBS Multi-Attach]: https://docs.aws.amazon.com/ebs/latest/userguide/ebs-volumes-multi.html
	// [Nitro-based instances]: https://docs.aws.amazon.com/ec2/latest/instancetypes/ec2-nitro-instances.html
	MultiAttachEnabled *bool

	// The target size of the volume, in GiB. The target volume size must be greater
	// than or equal to the existing size of the volume.
	//
	// The following are the supported volumes sizes for each volume type:
	//
	//   - gp2 : 1 - 16,384 GiB
	//
	//   - gp3 : 1 - 65,536 GiB
	//
	//   - io1 : 4 - 16,384 GiB
	//
	//   - io2 : 4 - 65,536 GiB
	//
	//   - st1 and sc1 : 125 - 16,384 GiB
	//
	//   - standard : 1 - 1024 GiB
	//
	// Default: The existing size is retained.
	Size *int32

	// The target throughput of the volume, in MiB/s. This parameter is valid only for
	// gp3 volumes. The maximum value is 2,000.
	//
	// Default: The existing value is retained if the source and target volume type is
	// gp3 . Otherwise, the default value is 125.
	//
	// Valid Range: Minimum value of 125. Maximum value of 2,000.
	Throughput *int32

	// The target EBS volume type of the volume. For more information, see [Amazon EBS volume types] in the
	// Amazon EBS User Guide.
	//
	// Default: The existing type is retained.
	//
	// [Amazon EBS volume types]: https://docs.aws.amazon.com/ebs/latest/userguide/ebs-volume-types.html
	VolumeType types.VolumeType

	noSmithyDocumentSerde
}

type ModifyVolumeOutput struct {

	// Information about the volume modification.
	VolumeModification *types.VolumeModification

	// Metadata pertaining to the operation's result.
	ResultMetadata middleware.Metadata

	noSmithyDocumentSerde
}

func (c *Client) addOperationModifyVolumeMiddlewares(stack *middleware.Stack, options Options) (err error) {
	if err := stack.Serialize.Add(&setOperationInputMiddleware{}, middleware.After); err != nil {
		return err
	}
	err = stack.Serialize.Add(&awsEc2query_serializeOpModifyVolume{}, middleware.After)
	if err != nil {
		return err
	}
	err = stack.Deserialize.Add(&awsEc2query_deserializeOpModifyVolume{}, middleware.After)
	if err != nil {
		return err
	}
	if err := addProtocolFinalizerMiddlewares(stack, options, "ModifyVolume"); err != nil {
		return fmt.Errorf("add protocol finalizers: %v", err)
	}

	if err = addlegacyEndpointContextSetter(stack, options); err != nil {
		return err
	}
	if err = addSetLoggerMiddleware(stack, options); err != nil {
		return err
	}
	if err = addClientRequestID(stack); err != nil {
		return err
	}
	if err = addComputeContentLength(stack); err != nil {
		return err
	}
	if err = addResolveEndpointMiddleware(stack, options); err != nil {
		return err
	}
	if err = addComputePayloadSHA256(stack); err != nil {
		return err
	}
	if err = addRetry(stack, options, c); err != nil {
		return err
	}
	if err = addRawResponseToMetadata(stack); err != nil {
		return err
	}
	if err = addRecordResponseTiming(stack); err != nil {
		return err
	}
	if err = addSpanRetryLoop(stack, options); err != nil {
		return err
	}
	if err = addClientUserAgent(stack, options); err != nil {
		return err
	}
	if err = smithyhttp.AddErrorCloseResponseBodyMiddleware(stack); err != nil {
		return err
	}
	if err = smithyhttp.AddCloseResponseBodyMiddleware(stack); err != nil {
		return err
	}
	if err = addSetLegacyContextSigningOptionsMiddleware(stack); err != nil {
		return err
	}
	if err = addUserAgentRetryMode(stack, options); err != nil {
		return err
	}
	if err = addCredentialSource(stack, options); err != nil {
		return err
	}
	if err = addOpModifyVolumeValidationMiddleware(stack); err != nil {
		return err
	}
	if err = stack.Initialize.Add(newServiceMetadataMiddleware_opModifyVolume(options.Region), middleware.Before); err != nil {
		return err
	}
	if err = addRecursionDetection(stack); err != nil {
		return err
	}
	if err = addRequestIDRetrieverMiddleware(stack); err != nil {
		return err
	}
	if err = addResponseErrorMiddleware(stack); err != nil {
		return err
	}
	if err = addRequestResponseLogging(stack, options); err != nil {
		return err
	}
	if err = addDisableHTTPSMiddleware(stack, options); err != nil {
		return err
	}
	if err = addInterceptBeforeRetryLoop(stack, options); err != nil {
		return err
	}
	if err = addInterceptAttempt(stack, options); err != nil {
		return err
	}
	if err = addInterceptors(stack, options); err != nil {
		return err
	}
	return nil
}

func newServiceMetadataMiddleware_opModifyVolume(region string) *awsmiddleware.RegisterServiceMetadata {
	return &awsmiddleware.RegisterServiceMetadata{
		Region:        region,
		ServiceID:     ServiceID,
		OperationName: "ModifyVolume",
	}
}